Nanovapor Inc.
Safer. Faster. Greener.
temp.png

Copy of Energy

Volatile Organic Compound (VOC) vapors create an inherent safety risk, as operators must reduce the organic vapor concentration below the “Lower Explosive Limit” (LEL), above which the fuel to oxygen ratio allows from combustion.


Volatile Organic Compound (VOC) vapors create an inherent safety risk, as operators must reduce the organic vapor concentration below the “Lower Explosive Limit” (LEL), above which the fuel to oxygen ratio allows from combustion. By suppressing fuel evaporation, you minimize the time spent in an explosive zone. NanoVapor significantly reduces risk of fire, explosion, and the amount of time using a flare; ultimately the time required to make the tank safe.


Gas Stations & Forecourts

Lorem ipsum […]

Underground Storage Tanks


There are hundred of thousands of Underground Storage Tanks (USTs) glorbally that store petroleum or hazardous substances. When cleaning up a site, or inspecting a UST for safety or maintenance, the tank often must be opened and entered. Even after the tank has been drained, hazardous and explosive vapors remain which escape to the atmosphere and create an unsafe work environment for human entry.

Our proven technology suppresses VOC formation up to approximately 50% faster so the atmosphere is not contaminated and your employees can work in an explosion-free, non-toxic environment. NanoVapor TankSafe is harmless to the environment, and safe for people, plants, and animals.

Above Ground Storage Tanks


Above Ground Storage Tanks (ASTs) at terminals, refineries, and tank farms require periodic inspection or maintenance for various reasons. Maintenance can include cleaning out the sludge at the bottom of the tank, fixing a leak, or inspecting the tank for problems. In addition, tank farms have frequent product changes. Traditional methods for degassing are time consuming, costly, produce more pulltants, and are potentially unhealthy and dangerous. For example, air purging is typically used to remove fuel vapors from the tank to make it safe work; however, this process is often time consuming (days to weeks) and unpredictable. NanoVapor’s ST-1000 Vapor Suppression System is a faster, safer, greener, and more cost effective alternative to these methods.


Why Nanovapor?

NanoVapor offers you a significant improvement in safety and can provide a valuable cost savings compared to using nitrogen or water.  Current degassing methods take significant time to complete, are expensive, and are considered a more hazardous operation. Methods using nitrogen or water to inert a tank require a large equipment footprint at the station.  This shuts down additional pumps and can impact convenience store foot traffic and sales.  If the degassing equipment footprint is too large for a small station, the convenience store may be shut down entirely impacting revenue to the owner and inconvenience to the customer.

The NanoVapor suppression system reduces costs and complexity over current techniques, while significantly reducing the work area footprint.  Although major service providers have expressed their primary focus is on Health, Safety and the Environment, the financial benefits are potentially significant as well.